Saturday, May 27, 2017

What's Up? Giorgio is up!

Here I go again, combining this fortnight's challenge "Oldie But Goodie" challenge at Stampotique Designer's Challenges with Stampotique's Facebook Group's "Word-Up Weekends" where we share projects created with Stampotique's many Words, Phrases, Letters, and Numbers.

If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this challenge. Visit Stampotique Designer's Challenges and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenge blog!

Giorgio was stamped with Tuxedo Black Memento ink (Imagine Crafts), colored with Copic markers, fussy-cut, and edged with a black marker. Giorgio's goggle lenses and his shell were coated with several layers of Clear Gelly Glaze pen (Sakura) to make them dimensional and shiny.

Here's a close-up to see the shiny dimension on Giorgio's goggle lenses and his shell.


Giorgio was set aside while I created a background for him. Spiced Marmalade, Broken China, Cracked Pistachio, and Tea Dye Oxide Distress inks (Ranger) were smushed onto my craft mat, spritzed with water, and a piece of 140 lb. Mixed Media cardstock (Strathmore) was dipped, dragged, and pressed into the ink, sprayed with water, and heat set. This process was repeated until I was happy with the look.

Bundled Sage and Peeled Paint Distress inks were sponged over the Moving Vines stencil (The Crafter's Workshop). The tree/coral from the Design Cube was stamped with Abandoned Coral Distress ink. The stamped image was immediately dabbed with a paper towel to soften it. This process was repeated with Tea Dye Distress ink. 


Old Linen Distress paint was dabbed along the bottom of the image panel, then heat set. This was repeated several times until layers of paint were built up a bit. Some of the paint was intentionally heat set too long to make the paint bubble to add additional texture. When the paint dried, Pumice Stone Distress marker was used to add some depth and detail to the the painted area to make it appear more like sand. Pumice Stone Distress ink was sponged along the edges of the image panel.

"This Side Up!" from the Barcode Text stamp was stamped with Jet Black Archival ink (Ranger), was adhered in place, and the image panel was adhered to a card front.

Thanks for visiting today!

I shall enter this card into the following challenges:
Creative Artist Mixed Media Challenges: Anything Goes
Crafty Awesomeness Challenges: Anything Goes
Creatalicious Challenges: Anything Goes (Stencils Option)
Let's Craft and Create Challenges: Create a Background

Tuesday, May 23, 2017

Spring Time Cat!

Cats plus flowers make me happy. The Purrfect Day Cats rubber stamp sheet (Stampinback), available at I Brake for Stamps makes me really happy ecstatic because the sheet includes TEN floral cat silhouettes, four paw prints, two sentiments, one fish skeleton, and one matching flower for a total of 18 fabulous images in this stamp set, which means you'll be seeing LOTS of flowery cats! By the way, IBFS ships internationally.

Here's my card with one of the ten floral kitties!


Fossilized Amber Distress Oxide ink(Ranger) was smooshed (technical term) onto my craft mat, spritzed with water, and then 140 lb. Mixed Media cardstock (Strathmore) was dragged through the diluted ink and heat set. This step was repeated with Spiced Marmalade Distress Oxide ink, then Worn Lipstick Distress Oxide ink. When I was happy with the coverage,  Post-It Notes were placed across the cardstock and Peeled Paint Distress Oxide ink was sponged over top. I wasn't really thrilled with the color, so I sponged Peeled Paint Distress and Mown Grass Distress ink over top.

Using my Stamp-a-Ma-Jig stamp positioner, the kitty from the Purrfect Day Cats sheet was stamped with Onyx Black VersaFine ink (Imagine Crafts). I had to re-ink the stamp and stamp it again to get better coverage probably because I was too inept to get it right the first time. I can't wait to get ahold of the of one of the new trendy stamp positioner systems so that I don't have to be quite so careful when re-stamping an incomplete image! Anyway, I touched up the image using a Black Pitt Artist Brush pen (Faber Castell).

A shadow was added under the cat using a Warm Grey Pitt Artist Brush pen.

The image panel was die-cut with one of the dies from the Mixed Rectangles Layering dies (Tonic Studios). A larger die from the same set, the "Purr-fect" die from the Cat Paw Print die set (Frantic Stamper), and the word "Just" from the Just a Note die (All Occasions) were used to die-cut black cardstock. The image panel was matted with the plain black rectangle die-cut. The sentiment was adhered in place.

The leftover Distress Oxide sponged cardstock was die-cut with the Butterfly die (Impression Obsession) and punched with a tiny dragonfly punch. The butterflies and the dragonflies were a bit boring, so I added Distress ink to them to perk 'em up a bit. My black marker was used to detail their bodies and edge them, then Black Spica Glitter pen was used to add a touch of glitter to them. The insects were adhered to the image panel and a Clear Stardust Gelly Glitter pen (Sakura) was used to add flight trails. The cardfront was adhered to a rust card.

I Brake for Stamps is where you'll find great selections of Stampinback stamps plus lots of other stamps from other stamp companies. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!



If you have any questions about the techniques or products I used, feel free to ask!

Thanks for visiting today!

Wednesday, May 17, 2017

This week's challenge at Stampotique Designer's Challenges is "For the Boys!" Here's the blurb about the challenge!
"Sometimes it's so difficult to create a "guy" card or project so we want to challenge you to do just that this week."
If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this challenge. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenge blog!

Here's my card with Mokiwea (Daniel Torrente), Design Cube #2 (France Papillon), and Quotes #1 (Carol's Collection).


Mokiwea was stamped with Tuxedo Black Memento ink (Imagine Crafts), colored with Copic markers, fussy-cut, and edged with black marker. A silver gel pen was used to add detail to the studs on Mokiwea's trousers. Mokiwea was set aside while I created a world for him.

A piece of Kraft Resist Paper Stash (Idea-ology) was sponged with Broken China and Wilted Violet Distress Oxide inks (Ranger), spritzed with water, and heat set. This was repeated until I was pleased with the look, though I then proceeded to cover up most of it. Poor planning on my part I suppose!

Black Shimmer Delicata ink (Imagine Crafts) was sponged over the New York City Skyline Stencil and Masks (Michelle Ward/The Ink Pad). Broken China and Wilted Violet Distress Oxide inks were sponged over the clock on the Made To Measure stencil (Andy Skinner/DecoArt). Black Soot Distress ink was sponged over the Mini Batground Layering stencil (Stampers Anonymous).

The hexagon pattern from the Design Cube #2 was randomly stamped with Faded Jeans Distress ink (Ranger). 

Ruler patterned Washi tape was adhered to the base of the background panel, then Mokiwea was positioned and adhered.

Pale purple vellum was die-cut with one of the dies from the Stitched Speech Bubble Edges die set (Die-Namics) and one of the sentiments from the was stamped onto it with Jet Black StazOn ink, then adhered to the top of the card.

The entire image panel was sponged with Black Soot Distress ink, then adhered to a black card.

Thanks for visiting today.

I shall enter this card into the following challenges:

Tuesday, May 16, 2017

Sea You Soon?

I celebrated Mother's Day all weekend as my gifts started arriving on Thursday. I guess that put me in the mood to create this card!



Steampunk Sea Turtle and Steampunk Baby Sea Turtle were stamped with Tuxedo Black Memento ink (Imagine Crafts), colored with Copic markers, fussy cut, and edged with black markers. Steampunk Sea Turtle and Steampunk Baby Sea Turtle's eyes, beaks, the screws on their armor, and the lenses on Steampunk Sea Turtle's periscopes were coated with several layers of Clear Gelly Glaze pen (Sakura). Steampunk Sea Turtle and Steampunk Baby Sea Turtle were then set aside for some mother-child quality time while I created a scenic background for them.

I recently received my new Distress Oxide inks (Ranger) and have been having a blast experimenting with them. Vintage Photo, Cracked Pistachio, and Broken China Distress Oxide inks were applied in various ways to 140 lb. Mixed Media cardstock (Strathmore). When I was happy with the look, Peeled Paint Distress ink was sponged over the Moving Vines stencil (The Crafter's Workshop) and Broken China Distress ink was sponged over the Gears Mini Layering stencil (Stampers Anonymous).

Media Modeling Paste (DecoArt) was scraped across the netting on the Mini Nautical Chains stencil (The Crafter's Workshop) in three places and allowed to dry. When it was dry, Media Texture Sand Paste (DecoArt) was scraped along the bottom. Some tiny gears and an anchor charm were embedded in the wet paste. When the Media Texture Sand Paste was dry, Vintage Photo Distress ink was lightly sponged to highlight the texture and add a depth to the color. 

The netting was touched up with a White Gelly Roll gel pen (Sakura), then Steampunk Sea Turtle and Steampunk Baby Sea Turtle were adhered. The image panel was matted with metallic copper, then adhered to a green card.

I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click HERE to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

I shall enter this card into the following challenges:
SanDee and amelie's Steampunk Challenges: Anything Goes
Let's Craft and Create Challenges: Create a Background

Tuesday, May 9, 2017

Celebrate!


Here's a festive card featuring Good Morning Sunshine from the fabulous and funny Humorous Senior Collection of stamps (I Brake for Stamps)FYI, IBFS ships internationally!

Good Morning Sunshine was stamped with Tuxedo Black Memento ink (Imagine Crafts) and colored with Copic markers, that were chosen to match the colors of the patterned papers from the Time to Celebrate collection (Graphic 45).

Patterned paper was die-cut with one of the dies from the Rectangle Frames die set (Die-Namics) and a nameplate die (Spellbinders). White cardstock was die-cut with a "celebrate" die from the Handwritten die set (Little B), then adhered atop the nameplate.

The image panel was adhered behind the frame die-cut. The patterned paper was layered, the image panel, and sentiment nameplate were adhered to the card front, the card front was adhered to a white card, and then white pearls were added to Good Morning Sunshine's ear and the die-cut to finish the card.

I Brake for Stamps is the home for the Humorous Senior Collection of stamps, which you ought to check out right now. IBFS also has a huge and varied collection of rubber stamps where you're sure to find something you like! Click HERE to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

I shall enter this card into the following challenges:
Sisterhood of Snarky Stampers: Y is for Yippee
Simon Says Monday Challenges: It's a Frame Up
Corrosive Challenges: Anything Goes

Sunday, May 7, 2017

Word-Up Weekend/One Layer Combo Card

I'm multi-tasking, combining this fortnight's challenge "One Layer" challenge at Stampotique Designer's Challenges  with Stampotique's Facebook Group's "Word-Up Weekends" where we share projects created with Stampotique's many Words, Phrases, Letters, and Numbers.

If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this month's challenges. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenges!

Here's a card with two of Stampotique's May release stamps, Isabelle (Tracy Scott) and one of the sentiments from Quotes #1 (Carol Ramsay).


Isabelle was stamped onto a 3.5" x 5" card with Jet Black Archival ink (Ranger) and colored with Zig Photo-Twin markers (EK Success). Purple Stardust Glitter Gel pen (Sakura) was used to make the baubles in Isabelle's crown sparkly. Red Stardust Glitter Gel pen added sparkle to the heart in her crown and the eyes of the skull. Orange Spica Glitter pen (Copic) was used to add glitter to the skull and crown. Clear Stardust Glitter Gel pen was used to outline the image.

The sentiment was stamped under the image with Jet Black Archival ink and the assistance of a stamp positioner. I decided that the card wasn't glittery enough so I used Clear Spectrum Noir Glitter Brush marker over the image and to underline the sentiment. Clear Gelly Glaze pen was used to add a touch of dimension and shine to the skull, heart, and baubles.

Thanks for visiting today!

Tuesday, May 2, 2017

Believe in Magic!

Here's a card with Hannah from the Mythical Reflections collection by Carmen Medlin Designs, available at I Brake for Stamps. You can buy separately or as part of the wonderful five stamp set. By the way, IBFS ships internationally!


Hannah was stamped with Tuxedo Black Memento ink (Imagine Crafts) and colored with Copic markers. The image panel was die-cut with one of the dies from the 5x7 Card Creator Nestabilities die set (Spellbinders). The image panel was kept in the die while I added the grass underneath Hannah's feet and the sky around her.

Patterned paper from my stash was layered. Chipped Sapphire Distress ink (Ranger) was sponged over the word "Magic" on the Believe Dinky stencil (That's Crafty) and heat set. When dry, "believe in" from the Christmastime Remnant Rubs sheet (Idea-ology) was added above the stenciled word. The image panel was adhered, then the card front was added to a white card.

I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click HERE to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

Sunday, April 30, 2017

Coffee Enhances Everything!

Due to a bunch of stuff, I almost missed "Word-Up Weekends" where we share projects created with Stampotique's many Words, Phrases, Letters, and Numbers.



Baby Cakes was stamped with Tuxedo Black Memento ink (Imagine Crafts) and colored with Copic markers. The image panel was die-cut with one of the dies from the Long Rectangles Nestabilities die set (Spellbinders), then matted onto pink cardstock sized slightly larger than the image panel.

"I'll Love You More After Coffee" from the Phrase Cube 2  was also stamped with Tuxedo Black Memento ink, then die-cut with one of the dies from the Birthday Speech Bubbles die set (Die-namics). Dotty colors were added with Copic markers.

Patterned paper from a seriously old 6x6 pad was cut to size, then the edges were distressed. The patterned paper was adhered to a pink card. The image panel was adhered, then the sentiment was popped up a bit and adhered as shown.

Thanks for visiting today!

Wednesday, April 26, 2017

A Time Tag!

This week's challenge at Stampotique Designer's Challenges is "One Layer" (#272). Here's the blurb about the challenge!
"You can only have one layer on your projects this week."
If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this challenge. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenges!

Here's my tag with Goth Grandfather Clock (Arwen McCullen), Design Cube 2 (France Papillon), and "One Second, One Minute, One Hour, One Day" (Janet Klein).


The Goth Grandfather Clock was stamped with Tuxedo Black Memento ink (Imagine Crafts) onto a tag die-cut from 140 lb. Mixed Media cardstock (Strathmore) with my trust Tag Alterations die (Sizzix). Goth Grandfather Clock was colored with Copic markers. The was also stamped onto Eclipse Tape (Judikins) then fussy-cut to be used as a mask.

The mask was placed over its counterpart on the tag, a Post-It Note was used to cover the top part of the cardstock and Copic markers were used to add the floor. The Post-It Note was moved to cover the floor and Tattered Rose, Milled Lavender, and Blueprint Sketch Distress inks (Ranger) were sponged over the tag, spritzed with water, then heat set. The same colors of Distress ink were sponged over the Gothic and the Clockwork Layering stencils (Stampers Anonymous), then spritzed, and heat set repeatedly to knock the patterns way back.

The crackle pattern from the Design Cube 2 was repeatedly stamped using the same colors of Distress ink. Again, the tag was spritzed with water and heat set. This process was repeated several times until I was happy.

Post-It Notes were used to cover the One Second, One Minute, One Hour, One Day" stamp, one phrase at a time was inked, the Post-It Notes were removed, and each phrase was stamped with Distress ink. When all four time phrases were stamped, the tag was once again spritzed with water and heat set to make the sentiments fade into the background.

The entire One Second, One Minute, One Hour, One Day" sentiment was stamped at the top, the mask was removed, and clear polka-dotted ribbon was added to finish the tag.

Thanks for visiting today!

I shall enter this card into the following challenges:
Dies R Us Challenges: Tags
Stamping Sensations Challenges: Anything Goes


Tuesday, April 25, 2017

Seascape Tag!

I love the ocean and I love to sail, though I don't get to do so very frequently. I guess that's why sailboats, beach scenes, and ocean-life stamps always appeal to me. 

My tag features the sailboat, gulls, and the compass from the Always Time for Friendship Half Sheet (Stampinback), available at I Brake for Stamps. By the way, IBFS ships internationally!


I recently received my long awaited set of Distress Oxide inks and after playing around a tiny bit, decided to try to create a seascape tag using them.

First I die-cut a tag from my beloved 140 lb. Mixed Media cardstock (Strathmore) using a very old Accucut die. Starting at the bottom of the tag, I sponged Vintage Photo, Faded Jeans, and Cracked Pistachio Distress Oxide inks (Ranger), spritzing the ink, then heat setting between each color. When I reached where I wanted the sun to be, I punched a circle from Eclipse Tape (Judikins), adhered it to the tag, then sponged Worn Lipstick and Broken China Distress Oxide inks, spritzing, and heat setting after the application of each color. When I was moderately happy with the colors of the tag, I lifted the circle, sponged Fossilized Amber Distress Oxide ink, spritzed it, and heat set that layer.

The next step was to stamp the sailboat from the Always Time for Friendship Half Sheet onto the tag with Jet Black Archival ink (Ranger). I colored the image using Pitt Artist pens (Faber Castell) and Zig Photo-Twin markers (EK Success).

The gulls and the compass were stamped with with Jet Black Archival ink (Ranger). White Gelly Roll gel pen (Sakura) was used to add sea foam and white caps to the ocean.

Three colors of hemp twine were added to finish the tag.

I Brake for Stamps is where you'll find great selections of Stampinback stamps plus lots of other stamps from other stamp companies. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!



If you have any questions about the techniques or products I used, feel free to ask!

Thanks for visiting today!

Tuesday, April 18, 2017

One of those Days!



The Those Days set includes a dazed looking creature and the sentiment "Ever have one of those days?". The creature from Those Days was stamped with Tuxedo Black Memento ink (Imagine Crafts), colored with Copic markers, fussy-cut, edged with a dark marker, then set aside while I created a background for him.

Using the Picasso Shield/Stencil (Stampendous), clouds were stenciled onto 140 lb. Mixed Media cardstock with Watering Can, Shadow Grey, and Hydrangea Archival ink (Ranger). Leaf Green and Fern Green were sponged along the bottom of the page.

An ancient tree die-cut was sponged with Tree Branch Archival ink, then touched up with Copic markers. The tree was adhered to the sponged image panel using Matte Multi-Medium (Ranger), then the creature from Those Days was adhered at the base of the tree. His eyes were touched up with Clear Gelly Glaze pen (Sakura) to make them dimensional and shiny. He was so out of it that he didn't feel a thing! Some white drops were judiciously added with a White One4All paint marker (Molotow).

White cardstock was die-cut with a cardinal die, then colored with Copic markers to magically become bluejays, which were then adhered to the tree.

"Ever have one of those days?", from the Those Days set was stamped in the upper right hand corner using Jet Black StazOn ink (Imagine Crafts). The image panel was matted with black cardstock and adhered to a white card.

I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

Sunday, April 16, 2017

Happy Easter!

Happy Easter! I've created an Easter carad for Stampotique's Facebook Group's "Word-Up Weekends" where we share projects created with Stampotique's many Words, Phrases, Letters, and Numbers.



Bunny Boy was stamped with Jet Black Archival ink (Ranger) onto 140 lb. Mixed Media cardstock (Strathmore) and onto Eclipse Tape (Judikins). The Eclipse Tape version was fussy-cut then set aside while its counterpart was colored using Zig Photo-Twin markers (EK Success). These markers are meant to be used to tint black and white photos, but I like to use them as watercolor markers. They're not as "juicy" as some and come in soft, subtle colors. These markers were used to add grass under Bunny Boy's feet.

The fussy-cut Eclipse Tape Bunny Boy was adhered over his brother on the image panel. Summer Sky and Angel Pink Memento inks were sponged over the Picasso Shield/Stencil (Stampendous) to create a cloudy sky.

I used one of the Zig Photo-Twin marker to color letters on the Alpha Background stamp, huffed on the stamp, and stamped the letters that I needed. The letters were punched with a small rectangle Paper Shaper punch (EK Success) and the color was touched up with the marker.

Patterned papers (Doodlebug) was layered as shown. Ancient Paper Frill borders were added over the seam between the patterned papers. Happy, Happy" was stamped onto the top border and the word "Easter" with the letters stamped with the Alpha Background stamp were added along the bottom. The image panel was adhered to the card front, which was then added to a white card.

Thanks for visiting today!

Friday, April 14, 2017

Antique Tea Set!

When I used the tea set last week, I thought to myself, "Self, wouldn't a teapot look cool if it had a crackled texture?" So I set about creating an antique tea set this gorgeous teapot and matching tea cups from a fabulous rubber stamp sheet (MS78) from Merry Stamper, available at I Brake for Stamps! The tea set has four tea gorgeous teapots with four matching tea cups, two sentiments, and a tiny steaming teapot.

Here it is!

The teapot and matching tea cups were stamped with Blueprint Sketch Distress ink (Ranger), colored with Copic markers, fussy-cut, then edged with a blue Sharpie marker. I used my index finger to coat the teapot and  tea cups with relatively thick layers of Distress Collage Crazing Medium (Ranger). They were left to dry for several hours. When completely dry, I had to place them under a stack of books for a few days to flatten them out.

Blue floral cardstock from the Daisy/Stripe Petite Prints 6x6 pad (Doodlebug Designs) was trimmed, then the edges were distressed. White cardstock was die-cut with the Fancy Floral Lace Border die (Cottage Cutz).

The border was adhered over the patterned paper, then the teapot and matching tea cups were adhered. The final step was to adhere card front was adhered to a blue card.

Here's a close-up view of the lovely crackling!


I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

Thursday, April 13, 2017

Bling It On!

This week's challenge at Stampotique Designer's Challenges is "Bling It On!" (#271). Here's the blurb about the challenge!
"Think shimmer, shine, or sparkle. Add something "blingy" to your project this week."
If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this challenge. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenges!



Patterned Circles was stamped onto 140 lb. Mixed Media cardstock (Strathmore) using Onyx Black VersaFine ink (Imagine Crafts), then heat embossed with Clear Detail embossing powder (Ranger). Agatha's Parrot was then stamped with Onyx Black VersaFine ink using a stamp positioner to perch him on one of the center circles. He was then heat embossed with Clear Detail embossing powder. The Patterned Circles and Agatha's Parrot were colored using PrismaColor markers because I didn't want to risk ruining my beloved Copics.

When I was done coloring Patterned Circles and Agatha's Parrot, a VersaMarker pen (Imagine Crafts) was used to cover the images with embossing ink. Polysparkle embossing powder (Ranger) was heat set. This process was repeated three times to add shiny, dimensional, and glittery look to Patterned Circles and Agatha's Parrot

Sketch and Wash pencil (General) was used to add a horizon to the image panel, then the top part of the image was covered with Post-It Notes. Hickory Smoke Distress ink (Ranger) was sponged over the bottom part of the image panel, the sponged again over the stencil included with the NK Studio Urban Scribble Foam and Cling Stamp set (Stampendous).

The Post-It Notes were removed and placed over the bottom portion of the image panel. Squeezed Lemonade Distress ink was sponged over the top portion of the image, then over the Bubbles stencil (Stampers Anonymous). Apparently, I had forgotten to clean the stencil, so a bit of blue ink ended up in the mix. Fossilized Amber Distress ink was then sponged over the stencil to add a bit of contrast.

Since the challenge theme is Bling It OnRoyal Peacock Fire Glitz Spray (Lindy's Stamp Gang), was sprayed over the entire image panel to add additional shimmer. I figured more glitter was needed, so Black Diamond Stickles glitter glue (Ranger) was added to the edges of the image panel. Then I was a good me and let it sit for several hours to dry.

While it was drying, Alpha Background  was stamped several times with Onyx Black VersaFine ink. I was thrilled to discover that my small rectangle Paper Shaper punch (EK Success) was (almost) the perfect fit for the letters in the Alpha Background . I punched out the letters I needed for my sentiment, touched them up with a grey Copic marker, then adhered them to the image panel.

The piece still needed more glitter, sparkle, shimmer, and shine, so I used glitter paper to mat the image panel, then adhered the matted image panel to a white card. A strand of rhinestone jewels was added to Agatha's Parrot's beak to finish the card.

Thanks for visiting today!

I shall enter this card into the following challenges:
Moving Along with the Times Challenges: Birds or Feathers
Addicted to Stamps and More: Make Your Mark
Crafty Cardmakers Challenges: Things with Wings

Tuesday, April 11, 2017

Elemental Fire Woman

Here's a card with Fire from the Elements Collection  by Carmen Medlin Designs, available at I Brake for Stamps.


Fire was stamped with Tuxedo Black Memento ink (Imagine Crafts) and colored with Copic markers. As per my Virgo nature, I googled Desert Hawks and decided that this hawk was a Harris Hawk and colored him accordingly.

The Fire image is so beautifully detailed that I decided to use a very clean design. I matted the image panel with dark brown cardstock to match my hawk, then adhered it to a piece of textured kraft cardstock that I found in my stash. The edges of the textured cardstock were sponged with Gathered Twigs Distress ink (Ranger), then the cardstock was adhered to a 5x7 card.

Dark bronze metallic cardstock was die-cut with the Ship's Compass die (Cherry Lynn Designs). The compass was adhered to the card, then the Fire image panel was added.

I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

Sunday, April 9, 2017

Word-Up Weekend/Text Challenge Combo!

Here I am multi-tasking by combining this week's challenge at Stampotique Designer's Challenges is Text (#270) with Stampotique's Facebook Group's "Word-Up Weekends" where we share projects created with Stampotique's many Words, Phrases, Letters, and Numbers.

If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this month's challenges. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenges!

Here's my rather large tag that uses the new Cooee (Karen Hayselden) stamp with "Make Magic Wherever You Go! (Amy Wilson-Wellenstein).



Cooee was stamped onto text paper from the Once Upon a Time stack (DCWV) with Tuxedo Black Memento ink (Imagine Crafts), then colored with Copic markers. Picket Fence Distress marker (Ranger) was used to color Cooee's eyes white. The image panel and another sheet from the same paper stack were die-cut with a die from the 5x7 Card Creator die set (Spellbinders). The edges were sponged with Shaded Lilac and Tea Dye Distress ink (Ranger), then adhered over a sheet with a castle on it. The edges of that sheet were also sponged with the same colors of Distress ink.

"Make Magic Wherever You Go! was stamped onto another scrap, then matted with a slightly larger scrap. Dimensional foam adhesive was used to adhere the sentiment to the tag panel.

I had found #10 Inkssentials Manila Tags  (Ranger) for dirt cheap. Shaded Lilac and Tea Dye Distress ink (Ranger) was sponged over the Flourish Layering stencil (Stampers Anonymous). Some hand-dyed seam binding was used to finish the tag.

Thanks for visiting today!

Wednesday, April 5, 2017

Live from New York, it's Caturday Night Live!

This week's challenge at Stampotique Designer's Challenges is Text (#270). Here's the blurb about the challenge!
"We are asking you to use some sort of text in your backgrounds this week. Weather it be newspaper, books, stamped words, something printed.. there possibilities are forever with this one."
If you'd like the chance to win your choice of $30 worth of Stampotique stamps, you should play along with this challenge. Visit Stampotique Designers Challenge blog and be sure to read the rules so that you'll have the chance to win that great prize!!! Remember to check to see the deadline for all of this month's Stampotique Designers Challenges!







TV, one of Stampotique's new April stamps, was stamped with Jet Black Archival ink (Ranger). The edges of the TV were covered with Post-It Notes. The other three cats on the Kitty Squad stamp were covered with Post-It Notes, the remaining cat was inked, then stamped into the TV screen.

First the Cat and the TV were slightly shaded with Copic markers. The Cat's body was colored with Oktoberfest Orange Magical Shaker. His ears were colored with Oom Pah Pah Pink Magical Shaker. His eyes were colored with the Freaky Frankenlime Magical Powder from the Haunted Halloween set of Magical Powders.

The exterior of the  TV was colored with Black Forest Black Magical Shaker (Lindy's Stamp Gang). The TV screen was colored with Tainted Love Teal Magical Powder from the Haunted Halloween set of Magical Powders. The TV logo was colored with Yodeling Yellow Magical Shaker and the table was colored with Bratwurst Brown Magical ShakerThe background of the image panel was coloreded with Bavarian Blue Magical Shaker.

The image panel and black metallic cardstsock were die-cut with two of the dies from the 5x7 Card Creator Nestabilities die set (Spellbinders). The image panel was matted with the black metallic cardstock and the sentiment was added with Simply Sweet rub-ons (Doodlebug Designs).

A newspaper television listing was scanned, then printed onto cardstock. It was colored with Black Forest Black Magical Shaker, heat set, and placed under heavy books to flatten. When completely dry, it was trimmed to 4.75" x 6.75".

Metallic black was die-cut three times with the Cityscape die (Memory Box). Yellow cardstock was die-cut three times with the Cityscape Silhouette die (Memory Box). Silver cardstock was die-cut with the Sturdy Bridge die (Memory Box).

The matted Cat and the TV image panel was adhered to the colored television listing, then the various cityscape and bridge dies were layered over the base of the image panel. The image panel was adhered to a 5x7 card.

Thanks for visiting today.

Tuesday, April 4, 2017

Beautiful Tea Pot

It's time for tea with this gorgeous teapot from a fabulous rubber stamp sheet (MS78) from Merry Stamper, available at I Brake for Stamps! The tea set has four tea gorgeous teapots with four matching tea cups, two sentiments, and a tiny little teapot, which will be perfect for making backgrounds!


The Teapot was stamped with London Fog Memento ink (Imagine Crafts) onto cardstock and onto mask paper. The mask paper version was fussy-cut. The cardstock version of the teapot was colored with Copic markers in mostly grey scale with a bit of light blue and aqua here and there. The color palette was chosen to match old patterned paper from a 6x6 pad.

The Teapot image panel was die-cut with one of the dies from the Sunray Venus Layering Basics die set (Tonic Studios) and kept in the die. The fussy-cut mask was adhered over the teapot image and Copic markers were airbrushed over the die and the mask.

Grey cardstock was die-cut with one of the bead chain dies from the Chains die set (Elizabeth Craft Designs) and a corner die (SCACD).

The patterned paper was layered, the chain die was adhered over the seam of the papers and the teapot image die-cut was adhered to the card front. The edges of the card front were sponged with London Fog Memento ink, then adhered to a grey card. The corner dies were added to finish the card.

I Brake for Stamps has a huge and varied collection of rubber stamps that you ought to check out right now. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!


Thanks for visiting today!

Saturday, April 1, 2017

Stampotique Stamps & Lindy's Stamp Gang: Color Challenge!

April is such an exciting month. Not only is Stampotique releasing new stamps, but the Stampotique Design Team is doing a collaboration with Lindy's Stamp Gang's Design Team! Lindy's Stamp Gang sent some of their wonderful products to us for use on our Stampotique projects this month. They also will send a prize pack to one of the participants at Stampotique Designers Challenges! The winner will be drawn at the end of April.

Here's a link to see Lindy's wonderful product line of colorful sprays, Magical Powders, embossing powders, and tools. We're kicking off our collaboration by participating in Lindy's Stamp Gang's Design Team's monthly color challenge!


Here's the color palette:


Here's the first card that I created with Cupcake Girl (Tera Callihan), which is one of April's new stamps. It also uses Skull Balloons (Arwen McMullen) and "Happy Birthday" (Janet Klein).


Cupcake Girl and Skull Balloons were stamped with Tuxedo Black Memento ink (Imagine Crafts), colored with Copic markers, fussy-cut, and edged with black marker. They were set aside while I worked on a background for them.

Media Modeling Paste (DecoArt) was scraped over the Chequered Dots stencil (Ranger), the Dinky Arrows stencil (That's Crafty), and Dinky Circles stencil (That's Crafty) onto 140 lb. Mixed Media cardstock (Strathmore) then allowed to dry.

When dry, Royal Peacock Fire Glitz Spray, Royal Emerald Fire Glitz Spray, Blue Hawaiian Blue Starburst Spray, and a tiny bit of Raspberry Lemonade Flat Fabio Spray was repeatedly sprayed and spritzed over the textured background until I was happy with the way it looked. The background was allowed to air dry, then heat set as well.

Cupcake Girl and Skull Balloons were adhered to the background. A thin black Sharpie pen was used to draw in the strings to the Skull Balloons. The image panel was matted with black cardstock, then adhered to a blue card. A scrap of the blue cardstock was die-cut with a nameplate die and "Happy Birthday" was stamped on it. The sentiment tag was adhered to finish this card.



Cupcake and Plushy were both stamped twice. Hand was stamped once. All images were fussy-cut, though the Cupcake and the Cupcake's frosting were fussy-cut separately.

The Cupcake paper wrapper was sprayed with Royal Emerald Fire Glitz Spray and Royal Peacock Fire Spray then allowed to dry. The Cupcake's frosting was sprayed with Raspberry Lemonade Flat Fabio Spray. The spray was allowed to dry. The frosting still looked a bit flat to me, so Sidewalk Chalk Magical Powder was mixed with Raspberry Lemonade Flat Fabio Spray on a palette. The resulting color was applied with my finger and/or a sponge dauber. The Cupcake liner and frosting were set aside to dry.

The Plushies and the Hand were colored with Copic markers and edged with a black marker. The  Plushies ' eyes were coated with several layers of Clear Gelly Glaze pen (Sakura) to make them shiny and dimensional. Gold gel pen was used to trace the Plushies ' earrings. The Plushies  and the Hand both joined the Cupcake while I created a background for them.

140 lb. Mixed Media cardstock was die-cut with one of the dies from the Rectangle Frames die set (Die-namics). It was sprayed with Rusty Lantern Lime Stardust Spray.

Another piece of 140 lb. Mixed Media cardstock was Royal Peacock Fire Glitz Spray and heat set. Then Royal Peacock Fire Glitz Spray, Blue Hawaiian Starburst Spray, and Raspberry Lemonade  Flat Fabio Spray were sprayed over a Bubbles stencil (Ranger). This was repeated until I was happy with the coverage. The sprayed stenciled cardstock was heat set and trimmed to size. 

A scrap of the sprayed cardstock was die-cut with a label die (Spellbinders) and the Ta-dah sentiment was stamped onto the die-cut.

Washi tape was added to the base of the stencilled sprayed cardstock panel. The Hand was adhered to the upper right of the panel The frame was adhered over it, then the Cupcake parts were pieced back together, and adhered to image panel. The Plushies were adhered as shown, and the Ta-dah sentiment was added to the frame and enhanced with a fuschia rhinestone flower. The card front was mounted onto a plain white card to finish the project!

Thanks for visiting today!

Friday, March 31, 2017

Steampunk Dragon!

Steampunk Dragonone of my favorite digital images by Carmen Medlin Designs, was recently released in glorious deeply etched rubber by  I Brake for Stamps Steampunk Dragon is available separately or in the New Steampunk rubber stamp set with six other fabulous Steampunk images that are also now in rubber! By the way, IBFS ships internationally!

Here's my card featuring Steampunk Dragon.


Steampunk Dragon was stamped with Tuxedo Black Memento ink (ImagineCrafts). The Steampunk Dragon and the entire image panel were colored with Copic markers. 

Silver metallic cardstock was die-cut two times with the Gearheads Alterations Corner (Sizzix) and layered atop a square of green metallic cardstock. The image panel was adhered, then the card front was adhered to brown cardstock to finish this CAS card!

I Brake for Stamps has lots of wonderful rubber stamps by Carmen Medlin Designs as well as a huge and varied collection of rubber stamps that you ought to check out right now. Click on my badge below to be whisked over to I Brake for Stamps to check out all of the goodies! Best of all, if you buy something, you can get a 10% discount off of your purchase if you use this code: SAVE10KATHI!